Sign In | Join Free | My spintoband.com
spintoband.com
Shishi Lvyu Chemical Trade Co., Ltd
Home > Chemical Agents >

Hydrophilic textile softener DC-HP

Product Categories
Shishi Lvyu Chemical Trade Co., Ltd
Shishi Lvyu Chemical Trade Co., Ltd
City: Quanzhou
Province/State: Fujian
Tel: 86-595-88959773
Contact Person:
Wanglin Lai

Hydrophilic textile softener DC-HP

Contact Now

Product Description

DC-HP hydrophilic textile softener is the new generation of revolutionary silicone patented product, has excellent feel and outstanding stability. In alkaline and high temperature can lead to the extreme conditions of the traditional amino-modified silicone oil emulsion breaking and floating oil, DC-HP has good stability; based on lower than the normal amount of traditional products, DC-HP is still can give all kinds of yarn and fabric soft, smooth and plump feel, as well as durable hydrophilic properties.

DC-HP hydrophilic textile softener is applied on a variety of fibers and fabric, all can give excellent feel, also has a very low yellowing properties, compared with the conventional amino-modified silicone emulsion. Diluent of DC-HP hydrophilic textile softeners even in the case of the pH14 strong bases and 100 °C high temperature boiling also has excellent shear stability. It's the best products to avoid silicone oil spot flaws in the textile printing and dyeing mill needs stripping or the repair color processing soft finish fabric.

Key features and benefits

* Amazing silicone soft and almost no yellow degeneration

* Applies to all cotton, chemical fiber and blended fabric

* Imparts lasting hydrophilic properties

* Excellent pH stability and shear stability

* Lasting good softness and washability

* Easy to operate, can be diluted with water, minimal agitation

* Compatible with most of the processing additives

* Easy decontamination finishing agent through bath use with organic fluorine class

* Can be easily peeled off from a finishing fabric

Typical product data

Products typical data value is not available as a product standard. Contact with Shishi City Lvyu Chemical Trading Co., Ltd. can get assist and product standards.

Application Process

DC-HP hydrophilic textile softener is a super softener suitable for all types of yarn and fabric: cotton, chemical fiber and cotton / synthetic blends. DC-HP with easy care resin bath for garment finishing, can also be used with the organic fluorine classes finishing agent with bath for dirt repellent finishing. DC-HP hydrophilic textile softener is usually use water directly diluted then adding to the finishing bath applications. DC-HP water dilution in the strong base and under high temperature conditions has excellent shear stability, can be applied to a conventional emulsion type softener can not display sufficient shear stability. DC-HP and diluted water in a wide pH (3-14pH) environment is very stable, which is generally as standard process the traditional emulsification of amino-modified silicone products are unable to do.

Instructions for use

DC-HP hydrophilic textile softener is very convenient to using, can be used directly, can also be a simple dilution with water before use. The best finishing processes and methods depending on the desired softness and feel of dyeing and after rinsing the yarn fabric requirements.


1 Padding process

Dosage3-5 g / l (thin fabric) 4-6 g / l (thick fabric)

pH 4-5 (adjust with glacial acetic acid)

Temperature 20-40℃

Liquid carrying rate 65-100%

Dried 100-130℃1-2 minutes

Curing 150-180℃1-3 minutes

2 Impregnation process

Dosage0.3-1.0% (calculated by weight of the fabric)

Bathratio 1/10-1/20

pH 4-5 (adjust with glacial acetic acid)

Temperature 30-50℃

Time 20-30 minutes

Dried 100-130℃

3 Garment washing process

Dosage 0.3-1.0% (calculated by weight of the fabric)

Conditions Same with impregnation process

Preparation of dilutions

DC-HP can be used directly, can also be diluted to a concentration of any activity. The desired concentration of the product according to the following procedure, Range is 5.0-30.0%.

Formula#1 #2 #3 #4

DC-HP hydrophilic fabric softener (%) 5 10 20 30

Ethoxylated fatty alcohol-15EO - ~0.3 ~1.0 ~1.5

Antimicrobial agent (%) 0.05 0.05 0.05 0.05

Water (%) 94.95 89.65 78.95 68.45

1. Pour the water and a surface active agent into the mixer, and stirred at 400rpm rotate speed until the surfactant is completely dissolved

2. Under stirring, slowly add the DC-HP hydrophilic fabric softener, and continue stirring for 5 minutes

3. If required, the fungicide may be added. Then stirred for 10 minutes

4. Filter into the container


DC-HP hydrophilic textile softener removal

* Formula for cotton fabric

2-5 g/l NaOH

2-3 g/l SDBS(sodium dodecyl benzene sulfonate, 30%)

Water

* Formulations for polyester fabrics

2-5 g/l Na2CO3

2-3 g/l AE-15(ethoxylated fatty alcohol-15EO)

* Removal process

Pour the fabric and the water into the machine

Cotton fabric add NaOH and SDBS, polyester fabric add Na2CO3 and AE-15

Heated to 100 °C, and continued boiling for 60 minutes

Cooled to 60 °C with glacial acetic acid neutralization to the PH value, and to 5-6

Water to clean the fabric


Handling and Storage

In order to ensure the quality of products, container when not use should be tightly sealed. It should be stored in normal room temperature, to avoid long-term exposure to extreme hot and cold environment, because the products may cause stratification. If the product layered, before using need to stir. If the product is frozen, heating thawing, stirring after thawing.


Product Tags:

textile softener

      
China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

Hydrophilic textile softener DC-HP Images

Inquiry Cart 0
Send your message to this supplier
 
From:
Enter your email please.
To: Shishi Lvyu Chemical Trade Co., Ltd
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0